Single continuous plating multi-catheter
Surface Overview: Based on mirror, sand surface, intrinsic gas, sputtering material (Ti) molecular sputtering coating principle, for ionic plating treatment surface, this product has super wear-resistant, super wear-resistant super corrosion, with new color-resistant anti-surfaces, common anti-mones, common colors, rose gold, rose, red, black titan titan titan titan titan and other colors.
Process route: Mirror/sand surface - Flying shear board continuous - Continuous gold plating treatment - New anti-fingerprint - Single paper finished product
Covered steel: 200 series, 300 series, 400 series
Surface type: rose gold, rose red, black titanium and other color series
Anti-fingerprint film thickness: Nano-anti-fingerprint (new type)
Abrasion resistance (MEK): ≥5000 times
Thickness range: 0.50mm-1.15mm
Length range: 2438mm, 3048mm, 4000mm
8k mirror
Surface Overview: By grinding, polishing, grinding, to achieve a smooth surface called a mirror, a cold roll 2B surface or a BA light plate surface to the entire rolling processing mode. The products are divided into fine grinding mirrors and ordinary mirrors.
Process route: Raw material No.2b/ba-full roll 8K polishing - Roll/plate finished product
Covered steel: 200 series, 300 series, 400 series
Surface type: Normal mirror (General 8K), fine grinding mirror (fine 8K)
Thickness range: 0.3mm-1.15mm
Surface gloss (GU): ≥1300GU (20°)
Surface roughness (μm): ≤0.02μm
Frosted drawing
Surface Overview: Use cold rolling 2B surfaces or BA smooth surfaces throughout the rolling treatment mode, grinding the surfaces with a combined sand strip unit to obtain different sand surfaces. Products are divided into snow sand surface, snow surface, sand surface, etc.
Process route: Raw material No.2B/BA-Full roll matte treatment - Roll/plate finished products
Covered steel: 200 series, 300 series, 400 series
Surface type: snowflake sand, snowflake sand + brush, snowflake sand + brush, snowflake sand + brush, sand, sand + brush
Thickness range: 0.3mm-2.0mm
Mirror 8K colored board series
Surface Overview: Based on 8K mirrors, in a vacuum environment, using inert gas luminescence emissions and magnet target sputtering technology, color processing on the surface or using water plating series to process color plate products, common mirror rose gold, mirror titanium, mirror brown, mirror brown, champagne gold, mirror black titanium and other color steels.
Process route: 1, Raw material 8K mirror - Physical coloring line - Roll/board finished products; 2, Raw material 8K mirror - Chemical coloring line - Roll/board finished products
Covered steel: 200 series, 300 series, 400 series
Surface type: mirror black titanium, mirror titanium, mirror rose gold, mirror champagne gold, mirror brown mirror color series
Coating layer thickness: ≥0.15μm (Note: measurement of ball molar method)
Wear resistance time (MEK): ≥1000 times (Note: The wear resistance test strength is 1000±100G)
Thickness range: Black titanium series: 0.3mm-1.15mm; Vacuum series: 0.3mm-1.15mm
Frosted drawing color palette series
Surface Overview: Based on the abrasive belt sand surface, under vacuum, using inert gas luminescent emissions and wood ementron target sputtering technology, color processing on the surface or water plating series, usually divided into sand rose gold, sand titanium, sand titanium, sand brown, brown, sand champagne, sand golden yellow, black titanium and other colored steels.
Process route: 1. Raw materials for sand surfaces of tooth-melting belts - physical coloring line - roll/plate finished products; 2. Raw materials for sand surfaces of sand strips - chemical coloring line - roll/plate finished products
Covered steel: 200 series, 300 series, 400 series
Surface type: sand surface black titanium, sand surface titanium, sand surface rose gold, sand surface champagne gold, sand surface brown and surface anti-fingerprint series sand panel series (various sand surface combinations).
Coating layer thickness: ≥0.18μm
Wear resistance time (MEK): ≥1000 times (Note: The wear resistance test strength is 1000±100G)
Thickness range: Black titanium series: 0.3mm-1.15mm; Vacuum series: 0.3mm-1.15mm
Color oil series
Surface Overview: On black titanium and sand surfaces, different colors of color refined oil series are used, and the color oil series products are obtained through roll coatings, spray coatings, roll coatings + sprays and other processes.
Process route: black titanium, sand surface raw material - frosted steel wire drawing - color oil processing - roll/plate finished products
Covered steel: 200 series, 300 series, 400 series
Surface type: brushed red bronze, brushed blue bronze, brushed yellow bronze, Chinese red, colorful drawings and other colorful oil products
Anti-fingerprint film thickness: Anti-fingerprint film thickness ≥1.5μm
Wear resistance time (MEK): ≥100 times (Note: The wear resistance test strength is 1000±100G)
Thickness range: 0.3mm-1.15mm
